|
Plaztuff™
Hyspec™ Polymer Sheet
Plaztuff™ meets the following specifications:
ASTM D4976 - PE 235 FDA 21 CFR 177.1520(c) 3.2a use conditions B through H UL94HB yellow card per UL file E54700 NSF Standards 14 and 61 for potable water
NOMINAL PHYSICAL PROPERTIES (1) SI Method
Density --- 0.948 g/cm3 ASTM D1505
Tensile Strength at Yield, 2 in/min, Type IV bar 25 MPa ASTM D638
Elongation at Break, 2 in/min, Type IV bar 700% ASTM D638
Flexural Modulus,
Tangent - 16:1 span:depth, 0.5 in/min 1,200 MPa ASTM D790
ESCR, Condition A (100% Igepal), F50 >600 h ASTM D1693
ESCR, Condition B (100% Igepal), F50 >600 h ASTM D1693
Durometer Hardness, Type D (Shore D) 68 ASTM D2240
Vicat Softening Temperature, Loading 1, Rate A 126°C ASTM D1525
Heat Deflection Temperature, 66 psi, Method A 78°C ASTM D648
Brittleness Temperature, Type A, Type I specimen <-75°C ASTM D746
Tensile Impact, Type S bar 190 kJ/m2 ASTM D1822
1. The nominal properties reported herein are typical of the product, but do not reflect normal testing variance and therefore should not be used for specification purposes. Values are rounded. The physical properties were determined on compression molded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1. MSDS #240370 Revision Date July, 2004
|
